as1526, AS1527 10-bit, single supply, low-power, 73ksps a/d converters austria micro systems product brief www.austriamicrosystems.co m revision 1.02 1 - 2 1 general description the as1526/AS1527 are low-power, 10-bit, 73ksps ana- log-to-digital (a/d) converters specifically designed for single-supply a/d applications. superior ac characteris- tics, very low power consumption, and robust packaging make these ultra-small devices perfect for battery-pow- ered analog-data collection devices. the integrated successive-approximation register (sar) and a fast (1.5s) sampling track/hold time provide an economic and highly-reliable a/d conversion solution. the as1526/AS1527 operate from a single 2.7 to 3.6v supply. the AS1527 requires an external reference, using less power than the as1526, however, the as1526 features an internal 2.5v reference. as with the AS1527, the as1526 can also be used with an external reference, which uses the input range 0v to v ref , including the positive supply range. the AS1527 consumes only 3mw (v dd = 3v) at the 73ksps maximum sampling spe ed. both devices feature a low-current (0.3a) shutdown mode, which reduces power consumption at slower throughput rates. data accesses are made via the standard, high-speed 3-wire serial interface, which is spi-, qspi-, and microwire-compatible. both devices contain an internal clock, however, both devices also support an external clock for increased flexibility. the as1526/AS1527 are available in an 8-pin soic-150 package. figure 1. block diagram and pin assignments 2 key features 10-bit resolution with 7.5s conversion time sampling rate: 73ksps straight binary (u nipolar) data format single-supply operation:+2.7 to +3.6v internal 2.5v reference (as1526) low power-consumption: - 4mw (73ksps, as1526) - 3mw (73ksps, AS1527) - 66w (1ksps, AS1527) - 1w (shutdown mode) integrated track/hold amplifier internal clock spi/qspi/microwire 3-wi re serial interface operating temperature range: -40 to +85oc 8-pin soic-150 package 3 applications the devices are ideal for remote sensors, data-acquisi- tion, data logging devices, lab instruments, or for any other space-limited a/d devices with low power con- sumption and single-supply requirements. as1526/AS1527 control logic output shift register internal clock 10-bit sar track/ hold 2.5v ref as1526/ AS1527 4 ref as1526 only 10-bit sar 6 dout 5 gnd 1 v dd 7 csn 8 sclk 3 shdnn 2 ain 4 ref 3 shdnn 2 ain 1 v dd 5gnd 6dout 7csn 8sclk
www.austriamicrosystems.co m revision 1.02 2 - 2 as1526, AS1527 austria micro systems product brief copyrights copyright ? 1997-200 6, austriamicrosystems ag, schloss premstaett en, 8141 unterpremstae tten, austria-europe. trademarks registered ?. all rights reserved. the materi al herein may not be reprodu ced, adapted, merged, trans- lated, stored, or used witho ut the prior written consent of the copyright owner. all products and companies mentioned are trademarks or registered trademarks of their respective companies. disclaimer devices sold by austriamicrosystems ag are covered by t he warranty and patent indemni fication provisions appearing in its term of sale. austriamicrosystems ag makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from pa tent infringement. austriami- crosystems ag reserves the right to chang e specifications and prices at any ti me and without notice . therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems ag for current information. this product is intended for use in normal commercial a pplications. applications requiring extended temperature range, unusual environmental requirements, or high reliability app lications, such as military, medical life-support or life- sustaining equipment are specifically not recommended wit hout additional processing by austriamicrosystems ag for each application. the information furnished here by austriamicrosystems ag is believed to be correct and accurate. however, austriamicrosystems ag shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or ar ising out of the furnishing, performance or use of the tech- nical data herein. no obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems ag rendering of technical or other services. contact information headquarters austriamicrosystems ag a-8141 schloss premstaetten, austria tel: +43 (0) 3136 500 0 fax: +43 (0) 3136 525 01 for sales offices, distributors a nd representatives, please visit: http://www.austriamicrosystems.com austria micro systems ? a leap ahead
|
